LOGITECH PROFILER SETTINGS

STEP ONE:
Open your Logitech Profiler and click up top and seect Global Device Settings. A box will open...now move to step two.

or if you dont use it then open the CONTROL PANEL-> GAME CONTROLLERS and click on the logitech line and properties. Then select DEVICE SETTINGS...a box will open...now move to step two.

STEP TWO:
Turn your OVERALL EFFECTS STRENGTH SLIDER all the way to the left so it is set to 0
Move all other slider bars to: 150%
Centering Spring Strength: MAX %

UNCHECK COMBINED PEDALS
Set DEGREES OF ROTATION TO 270. Sometimes its hard to get it there so stop at 271.

Now close that panel and start the ASR software.

IN GAME SETTINGS:
Open ASR and click on GAME SETTINGS-> MAPPINGS TAB and pay attention to the steering axis and brake axis. Write them down if needed.

STEERING AXIS SETTINGS
Steering Axis Sensativity at all tracks should be set t0 50%.

BRAKE AXIS SETTINGS
Now set the sensativity for your brake axis to 35% (usually Joy 1 RZ-...may be different on your system)
Now click the deadzone box and set your deadzone for that axis to 20%.
This allows for a more realistic brake as well as smoother trailbreaking.

STEERING WHEEL RANGE
This adjsutment is located in the bottom left corner of the screen. Set it to 270.

PER TRACK STEERING LOCKS:
Short Tracks (8.5-12.5)
Heavy Intermediate and Intermediate (7.5-10.5)
Speedways (5.0-6.5)
Road Courses (10-15)

You should be good to go. Go check it out!

Logitech profiler:

Enable Centering Spring: Do we need checked? If so, what %?

Game Settings:

Allow Game To Adjust Settings: Do we need checked?

Ingame:

Any adjustments to the FF?

updated post for settings

what should the digital steering rate and throttle rate be set at ? right now both are at 13 %

I would leave digital rates at default. Some may say otherwise...but i never touch them.

I have a G27 with my pedals plugged in with a bodnar cable. The sim is not recognizing the pedals.. When I click on the Throttle, Brake or Cluch it does not see them, only the wheel.

How is this corrected?

Thanks
RJ

Go to Game Settings, then on the Mapping tab make sure the throttle, brake , and clutch are maped correctly.

Quick question, The G27 is a 900 degree wheel. Does the ARCA game only support of to a 270 degree rotation?

No you can control rotation under game settings.... recommended is 240 to 400 but it is up to you. It supports 900 degrees

cool thanks